it’s a sudden spill or a rainy day, our transparent waterproof coating keeps you completely protected—so you can relax, stay dry, and enjoy every moment with confidence.
5 years waterproofing warranty.
Superior Whiteness & hiding.
Upto 10% increase in top coat coverage
On all masonry and cementitious surfaces.
| Most Common Problems with Other Brands | Reason | Does the other brand protect against all these problems? | Bewahren konstruction |
|---|---|---|---|
| 1. Peeling, flaking or bubbling within months | – Coating is only a thin film; hydrostatic pressure or capillary moisture in masonry pushes it off. – Poor surface prep leaves dirt, efflorescence or high moisture behind the film. | ❌ | ✅ |
| 2. Trapped moisture that migrates inward and damages substrate | – Transparent membranes are vapour-tight; any residual wall dampness condenses behind them, fostering mould, efflorescence and structural spalling. | ❌ | ✅ |
| 3. Loss of transparency—yellowing, cloudiness or chalky haze | – UV and heat degrade many acrylic / polyurethane resins; oils from asphalt roofs or airborne dirt migrate upward and discolor the film. | ✅ | ✅ |
| 4. Short service life & poor crack-bridging | – Films are thin (≤ 0.3 mm) and cannot span dynamic cracks > 1 mm; UV and thermal cycling embrittle them, so re-coating is required every 2-5 years. | ❌ | ✅ |
| 5. Health, odor and environmental concerns | – Aerosolized fluoropolymer or solvent vapours trigger acute lung injury; VOC levels of some sealers exceed green-building limits. | ❌ | ✅ |
Book Your Free Site Evaluation with a Bewahren Konstruction Expert — Just Fill Out the Form Below
Designed for Use on All Vertical Walls
Designed for Use on All Vertical Walls
Suitable for use on all cement-based and masonry terrace surfaces.
All information at your fingertips; download and explore the product information.
This coating is a single-component acrylic-based transparent liquid rubber that cures to form a seamless, waterproof barrier. It adheres to concrete, tiles, walls, and more, sealing leaks while maintaining the surface’s original appearance
It’s suitable for a wide range of surfaces—bathroom floors, kitchens, balconies, roofs, wall joints, shower areas, basements, even swimming pools. Ideal for both vertical and horizontal applications
Transparent finish preserves original aesthetics
Excellent elasticity and tensile strength
Good chemical and UV resistance
Eco‑friendly with low VOCs
Anti-aging properties for long-term durability
Surface prep: Clean, dry, dust/oil‑free substrate (5–35 °C, 35–85% RH)
Coating layers:
1st coat: ~0.55 mm, wait ~12 hours
2nd coat: ~0.7 mm applied perpendicularly to the first
3rd coat: another ~0.7 mm crosswise, total thickness around 2.0–2.2 mm
Drying: surface touch dry in ~4 hours, fully cured in ~12 hours
Once fully cured, it offers robust waterproof protection for roofs, balconies, and wet zones. The polymer formulation ensures long-term resistance to aging and environmental damage. Inspect annually and recoat thinly if wear is observed. Cleaning tools after use is easy with methylbenzene or dimethylbenzene solvents
